Newbie's Guide To Preparing Your Pontoon Boat For Winter Storage

Now that the colder months have arrived, it's time to prepare your pontoon boat for storage.  Although this task can appear daunting at first for a newbie, carrying out these basic maintenance tasks can help to keep your boat 'ship shape' for many seasons to come.

Here's how to prepare your pontoon boat for its winter rest.

1.    Deep clean

The first thing to do is give your boat a thorough clean.  Take off everything that's not a permanent fixture to make the process quicker, and give all seats a good wipe down, using a solution of washing-up liquid and water.  This will get rid of any moisture, muck, and sunscreen.

When the boat is out of the water, use a pressure washer to blast any barnacles and sediment off the hull.  When the hull is dry, apply a protective polish to the aluminium.

2.    Engines

If you have an outboard engine, disconnect the battery and lower the engine to protect it from accumulating rainwater.  For both inboard and outboard engines, drain the engine block as per the boat's owner's manual.

Most manufacturers recommended applying fogging oil before winterising your boat.  You can obtain fogging oil from your local pontoon boat supplies store; just follow the simple instructions on the packaging.

Next, top up the engine with antifreeze.  Avoid using brands that contain ethylene glycol, as it can release damaging toxins into the water.

3.    Oil and fuel

It's important that you leave your fuel tank about three quarters full.  This prevents condensation from building up inside the tank.  Add a fuel stabiliser.

Switch off all the valves to the engine and seal the exhaust ports.  These steps help to prevent the tank corroding on the inside.

At this stage it's a good idea to replace the oil and filters, following the owner's manual for guidance.  If you prefer, you can leave this job until you get your boat out again in the spring, but it's worth doing now so that your pontoon is all set for use next season.

Now drain the lower unit oil and inspect it for consistency.  If you can see a milky fluid in the oil, this could be an indication that water is getting into the engine, and you will need to ask a qualified mechanic to have a look at it for you.

4.    Battery

You can either leave the battery on board or take it off and store it separately for the closed season.  If you remove the battery, be sure to store it somewhere dry and where the temperature will remain above freezing.  If you leave your battery on-board, you'll need to disconnect it and leave it connected to a trickle charger so that it doesn't go flat.

In conclusion

If you're new to pontoon boat ownership, you can prepare your vessel for its winter holiday by following the tips given above.  You should also have your pontoon boat serviced professionally by a qualified engineer before you put it into storage to ensure that the spring season starts without a hitch. For more on pontoon boats, check out a company like White Water Marine.

About Me

Buying a business with your old boss

My old boss and I were made redundant from our jobs at the same time. We were a bit sad about the idea of not working together, but then we realised that we would be able to work together if we used our redundancy payments to buy a business. We were both really good at our jobs and loved working together so it just made sense to team up. We built our business up slowly but surely and now we make more money than we ever did in our old jobs. This blog has some of the information I wished I had before I started the business, like tips on how to set up your business administration processes.



Latest Posts

15 May 2017
Custom jewellery, or jewellery you've had designed and made specifically for you, can be a great choice for an engagement or wedding ring, as a specia

24 February 2017
If you want to install a lawn for your newly-built house, there are two options available: a natural turf lawn or an artificial turf lawn. Your choice

21 February 2017
Corrosion is a major concern for boats, since the process occurs in every type of water. In simple terms, all water vessels designed for leisure are b